D-Link DMC-515SC – 10/100BASE-TX to 100BASE-FX SC Single-Mode Media Converter, 15km Fiber Distance, Auto MDI/MDIX & Chassis Support

• The D-Link DMC-515SC is a Fast Ethernet Media Converter designed to convert 10BASE-T / 100BASE-TX twisted-pair Ethernet signals into 100BASE-FX single-mode fiber signals.

• It supports single-mode fiber transmission up to 15km, making it suitable for extending Ethernet networks beyond copper cable distance limitations.

• The converter provides 1 RJ45 twisted-pair port and 1 SC fiber port, allowing reliable point-to-point copper-to-fiber network extension.

• It supports Auto-Negotiation, Auto MDI/MDIX, store-and-forward mechanism, back-pressure, IEEE 802.3x Flow Control, and full wire-speed forwarding.

• The DMC-515SC can be used as a standalone media converter or installed inside a compatible chassis, where it supports hot-swappable operation.

• Fast Ethernet media converter

• 10BASE-T / 100BASE-TX to 100BASE-FX conversion

• 1 × RJ45 twisted-pair port

• 1 × SC single-mode fiber port

• Fiber distance up to 15km

• Auto-Negotiation of speed and duplex mode

• Auto MDI/MDIX support

• Store-and-forward mechanism

• Back-pressure support

• IEEE 802.3x Flow Control

• Full wire-speed forwarding rate

• Front panel status LEDs

• Standalone operation support

• Chassis installation support

• Hot-swappable when used with chassis

• Brand: D-Link

• Model: DMC-515SC

• Product Type: Fast Ethernet Media Converter

• Conversion Type: 10BASE-T / 100BASE-TX to 100BASE-FX

• Fiber Type: Single-Mode Fiber

• Fiber Connector: SC

• Maximum Fiber Distance: 15km

• Installation: Standalone / Chassis Installation

• Application: Fast Ethernet to Fiber Conversion, Long-Distance Network Extension, Fiber Backbone Connectivity

• Copper Port: 1 × RJ45 10BASE-T / 100BASE-TX Port

• Fiber Port: 1 × 100BASE-FX SC Single-Mode Fiber Port

• Copper Speed: 10/100Mbps

• Fiber Standard: 100BASE-FX

• Fiber Mode: Single-Mode

• Auto MDI/MDIX: Supported

• Auto-Negotiation: Speed and Duplex Mode on Twisted-Pair Port

• Media Conversion: One-Channel Conversion Between 10BASE-T / 100BASE-TX and 100BASE-FX

• Transmission Method: Store-and-Forward

• Back Pressure: Supported

• Flow Control: IEEE 802.3x Flow Control

• Forwarding Rate: Full Wire-Speed Forwarding Rate

• Chassis Support: Supported

• Hot-Swappable: Supported When Used with Chassis

• Power: Supported

• 100Mbps Speed: For Twisted-Pair Port

• Full Duplex / Collision: For Twisted-Pair and Fiber Ports

• LINK / ACT: For Twisted-Pair Port

• Power Input: 7.5V / 1.5A

• Power Source: External AC Power Adapter

• Dimensions: 120 × 88 × 25mm

• Operating Temperature: 0°C to 40°C

• Storage Temperature: -25°C to 70°C

• Operating Humidity: 10% to 90% Non-Condensing

• Fiber Wavelength: 1310nm

• Fiber Distance: Up to 15km

• EMI: FCC Class A, CE Class A, VCCI Class A, C-Tick

• Fast Ethernet to fiber conversion

• Single-mode fiber network extension

• Building-to-building fiber links

• CCTV and data fiber backbone

• Switch-to-switch fiber uplink

• Telecom and network cabinet installations

• Remote site network connectivity

• Chassis-based media converter systems

• Long-distance Fast Ethernet links up to 15km

• Connect Gates recommends the D-Link DMC-515SC for projects that require reliable Fast Ethernet copper to single-mode fiber conversion up to 15km.

• It is suitable for CCTV networks, office networks, telecom cabinets, and building-to-building links where copper cabling distance is not enough.

• The SC single-mode fiber interface, Auto MDI/MDIX, IEEE 802.3x Flow Control, and chassis support make it practical for professional network installations.

• For proper installation, Connect Gates recommends checking the fiber type, SC connector compatibility, required fiber distance, power location, and chassis requirement before deployment.