D-Link DKT-50 – Gigabit PoE Splitter with 10/100/1000Mbps RJ45, 5V / 9V / 12V Output, 802.3af PoE & Plug-and-Play Installation

• The D-Link DKT-50 is a Gigabit PoE Splitter designed to split power and data from a PoE Ethernet cable for use with non-PoE network devices.

• It supplies both Gigabit Ethernet data and DC power to devices such as surveillance cameras, wireless access points, bridges, and routers.

• The splitter allows non-PoE devices to be installed in hard-to-reach locations such as rooftops, ceilings, walls, and areas without nearby power outlets.

• It supports 5V, 9V, and 12V output options, providing flexibility for different device power requirements.

• The DKT-50 supports Gigabit data rates up to 10/100/1000Mbps and can receive power and data over Ethernet cable up to 100m away from the PoE source.

• It supports both IEEE 802.3af PoE and proprietary PoE, with compact plug-and-play installation and no software required.

• Gigabit PoE Splitter.

• Splits PoE Ethernet cable into DC power and standard Ethernet data.

• Supports non-PoE LAN devices and cameras.

• Supports 10/100/1000Mbps Gigabit Ethernet.

• RJ45 Ethernet connector.

• Supports 5V, 9V, and 12V DC output voltages.

• Receives power up to 100m away over Ethernet cable.

• Supports IEEE 802.3af PoE.

• Supports proprietary PoE.

• Compact design for easy installation.

• Plug-and-play operation.

• No software required.

• Operating system independent.

• Power LED indicator.

• Suitable for access points, IP cameras, bridges, routers, and other non-PoE devices.

• Product Type: Gigabit PoE Splitter

• Brand: D-Link

• Model: DKT-50

• Ethernet Data Rate: 10/100/1000Mbps

• Ethernet Connector: RJ45

• Cable Standard: TIA / EIA 568 Cat.5 and Above

• PoE Compliance: IEEE 802.3af PoE, Proprietary PoE

• Power Input: 48V DC

• Power Output: 5V, 9V, or 12V DC

• Maximum Cable Distance: Up to 100m

• LED Indicator: Power LED

• Dimensions: 63 × 62 × 24 mm

• Weight: 50g

• Operating Temperature: 0°C to 60°C

• Storage Temperature: -20°C to 70°C

• Operating Humidity: 10% to 80%, Non-Condensing

• Storage Humidity: 5% to 90%, Non-Condensing

• Certifications: FCC Class B, CE Class B

• Supplying power and data to non-PoE IP cameras.

• Installing non-PoE access points in areas without nearby power outlets.

• Using PoE cabling to power bridges, routers, and LAN devices.

• CCTV, wireless, and network installations in ceilings, rooftops, corridors, and remote locations.

• Converting PoE from a PoE switch or injector into separate Ethernet and DC power outputs.

• Projects where existing Ethernet cable is available but local power is difficult to provide.

• Small offices, villas, warehouses, shops, and surveillance networks.

• Recommended for projects where a non-PoE device needs to be powered from a PoE network line.

• Suitable for non-PoE cameras, access points, bridges, routers, and LAN devices requiring 5V, 9V, or 12V DC output.

• Best used when the client needs Gigabit data, flexible voltage output, compact installation, and up to 100m PoE cable distance without adding a local power adapter near the device.