D-Link DGS-3130-54PS – 48-Port Gigabit PoE Lite Layer 3 Stackable Managed Switch with 10G Uplinks
Overview:
• The D-Link DGS-3130-54PS is a Lite Layer 3 stackable managed switch designed for secure enterprise and metro Ethernet access networks.
• It provides 48 × 10/100/1000BASE-T PoE ports, 2 × 10GBASE-T ports, and 4 × 10G SFP+ uplink ports.
• The switch supports IEEE 802.3af and IEEE 802.3at PoE standards, making it suitable for powering IP cameras, wireless access points, IP phones, and other PoE-enabled devices.
• It includes a 370W default PoE power budget, expandable up to 740W when used with the DPS-700 redundant power supply.
• The DGS-3130 Series supports enhanced reliability and security features such as ERPS, STP/RSTP/MSTP, Loopback Detection, Broadcast Storm Control, ACL, IP-MAC-Port Binding, DHCP Snooping, and 6kV surge protection on Gigabit Ethernet ports.
Key Features:
• 48-Port Gigabit PoE Stackable Managed Switch
• 48 × 10/100/1000BASE-T PoE Ports
• 2 × 10GBASE-T Uplink Ports
• 4 × 10G SFP+ Uplink Ports
• Lite Layer 3 Switching Features
• IEEE 802.3af/at PoE Support
• 370W PoE Power Budget
• Expandable up to 740W with DPS-700 RPS
• 216Gbps Switching Capacity
• 161Mpps Packet Forwarding Rate
• 4MB Packet Buffer
• Virtual Stacking with up to 32 units
• D-Link Single IP Management Support
• 6kV Surge Protection on Gigabit Ethernet Ports
• ERPS Ring Protection with 50ms Recovery
• Advanced Security with ACL, IMPB, DHCP Snooping, ARP Spoofing Prevention, and DoS Attack Prevention
• Suitable for Enterprise Access, IP Surveillance, VoIP, Wireless AP, and Metro Ethernet Networks
Technical Specifications:
• Product Type: Lite Layer 3 Stackable Managed PoE Switch
• Brand: D-Link
• Model: DGS-3130-54PS
• Series: DGS-3130 Series
• Port Configuration: 48 × 10/100/1000BASE-T PoE Ports + 2 × 10GBASE-T Ports + 4 × 10G SFP+ Ports
• PoE Ports: 48 Ports
• PoE Standards: IEEE 802.3af / IEEE 802.3at
• Default PoE Power Budget: 370W
• Maximum PoE Power Budget: 740W with DPS-700 RPS
• 10GBASE-T Ports: 2 Ports
• 10G SFP+ Ports: 4 Ports
• Console Port: 10/100/1000BASE-T RJ45 port for out-of-band CLI management
• Management Port: 10/100/1000BASE-T RJ45 port for out-of-band IP management
• USB Port: 1 × USB 2.0 Type-A Port
• Switching Capacity: 216Gbps
• 64-Byte Packet Forwarding Rate: 161Mpps
• Packet Buffer Memory: 4MB
• Optional Redundant Power Supply: DPS-700
• MTBF: 356,876 Hours
• Acoustics: Max 54.2dB / Min 36.8dB
• Heat Dissipation: 1662.6 BTU/h with 370W PoE load / 3097.24 BTU/h with 740W PoE load
• Power Input: 100 to 240V AC, 50 to 60Hz
• Maximum Power Consumption: 487.26W with 370W PoE load / 907.71W with 740W PoE load
• Dimensions: 440 × 350 × 44mm
• Weight: 5.14kg
• Ventilation: 4 × Smart Fans
• Operating Temperature: 0°C to 50°C
• Storage Temperature: -40°C to 70°C
• Operating Humidity: 10% to 90% RH
• Storage Humidity: 5% to 90% RH
• Emission Standards: FCC Class A, CE Class A, VCCI Class A, IC, RCM, BSMI, CCC
• Safety Standards: CB, cUL, BSMI, CCC
• Stacking: Virtual Stacking, D-Link Single IP Management, up to 32 units per virtual stack
• MAC Address Table: 16K entries
• Jumbo Frame: Up to 9K Bytes
• VLAN Support: Up to 4K VLAN Groups
• Link Aggregation: Up to 32 groups per device, 8 Gigabit ports per group
• L2 Features: Flow Control, HOL Blocking Prevention, STP, RSTP, MSTP, BPDU Filtering, Root Restriction, Loopback Detection, Port Mirroring, RSPAN, ERPS
• L2 Multicasting: IGMP Snooping v1/v2/v3, MLD Snooping v1/v2, up to 1024 IGMP groups, up to 1024 MLD groups
• QoS Features: 802.1p, 8 queues per port, Strict Priority, WRR, Strict + WRR, bandwidth control, DSCP, flow-based control
• ACL Support: Up to 2048 ingress access entries and 512 egress access entries
• Security Features: SSH v2, SSL v1/v2/v3, Port Security, IP-MAC-Port Binding, DHCP Snooping, Storm Control, Traffic Segmentation, D-Link Safeguard Engine, ARP Spoofing Prevention, DoS Attack Prevention, BPDU Attack Protection
• AAA Features: 802.1X, Web-based Access Control, MAC-based Access Control, Guest VLAN, RADIUS Accounting, TACACS+
• Green Features: RoHS, Power Saving by Link Status, Power Saving by Cable Length, Time-based PoE, IEEE 802.3az Energy Efficient Ethernet
• Management Features: Web GUI, CLI, Telnet, TFTP, Secure FTP, SNMP v1/v2c/v3, SNMP Traps, System Log, sFlow, RMON, LLDP, DHCP Auto-Configuration, DHCP Relay, Multiple Images, Multiple Configurations
• Layer 3 Features: Static Route, RIP, RIPng, Max 16 IP Interfaces, ARP Proxy, IPv6 Neighbour Discovery
• Optional 10G DAC Cables: DEM-CB100S, DEM-CB300S, DEM-CB700S
• Optional SFP Transceivers: DEM-712, DEM-310GT, DEM-311GT, DEM-312GT2, DEM-314GT, DEM-315GT
• Optional SFP+ Transceivers: DEM-431XT, DEM-431XT-DD, DEM-432XT, DEM-432XT-DD, DEM-433XT, DEM-433XT-DD, DEM-434XT, DEM-436XT-BXD, DEM-436XT-BXU
Applications:
• Enterprise access layer networks
• IP surveillance camera networks
• Wireless access point deployment
• VoIP and IP phone systems
• PoE network infrastructure
• Metro Ethernet access networks
• Campus and building network distribution
• CCTV backbone and edge connectivity
• High-density office LAN deployment
• Managed network environments requiring 10G uplinks and strong security
Connect Gates Recommendation:
• Connect Gates recommends the D-Link DGS-3130-54PS for enterprise projects that require high-density Gigabit PoE connectivity with reliable 10G uplink options.
• It is an ideal choice for CCTV, wireless AP, VoIP, and access layer deployments where many PoE devices need to be powered from one managed switch.
• The switch is especially suitable for factories, hotels, campuses, large offices, schools, hospitals, and business buildings that need secure managed PoE infrastructure.
• For best performance, Connect Gates recommends using suitable SFP/SFP+ transceivers or DAC cables according to uplink distance, fiber type, network topology, and PoE power requirements.