D-Link DGS-3000-10TC – 8-Port Gigabit Layer 2 Managed Switch with 2 Combo SFP Uplink Ports
Overview:
• The D-Link DGS-3000-10TC is a Layer 2 Gigabit managed switch designed for metro, campus, enterprise access, and telecom distribution networks.
• It provides 8 × 10/100/1000BASE-T ports and 2 × combo 10/100/1000BASE-T/SFP uplink ports.
• The switch comes in a compact 9-inch case, making it suitable for telecom cabinets, distribution boxes, and installations with limited space.
• It supports 20Gbps switching capacity, 14.88Mpps packet forwarding rate, 16K MAC address table, 1.5MB packet buffer, and jumbo frames up to 12,288 bytes.
• The DGS-3000 Series supports 6kV surge protection on Ethernet ports, redundant power supply support, ERPS 50ms recovery, Loopback Detection, Link Aggregation, IPv6 Ready Logo Phase 2, ACL, IMPB, ARP Spoofing Prevention, and advanced Layer 2 management features.
Key Features:
• 8-Port Gigabit Layer 2 Managed Switch
• 8 × 10/100/1000BASE-T Ports
• 2 × Combo 10/100/1000BASE-T/SFP Uplink Ports
• Compact 9-Inch Case Design
• 20Gbps Switching Capacity
• 14.88Mpps Packet Forwarding Rate
• 16K MAC Address Table
• Jumbo Frame up to 12K Bytes
• 6kV Surge Protection on Ethernet Ports
• Redundant Power Supply Support via DPS-200
• ERPS 50ms Ethernet Recovery
• STP / RSTP / MSTP Support
• Loopback Detection and Link Aggregation
• IPv6 Ready Logo Phase 2
• Advanced Security with ACL, IMPB, DHCP Snooping, ARP Spoofing Prevention, and DoS Attack Prevention
• Suitable for Metro Access, Campus Networks, Telecom Cabinets, and Enterprise Edge Deployments
Technical Specifications:
• Product Type: Layer 2 Gigabit Managed Switch
• Brand: D-Link
• Model: DGS-3000-10TC
• Series: DGS-3000 Series
• Port Configuration: 8 × 10/100/1000BASE-T Ports + 2 × Combo 10/100/1000BASE-T/SFP Ports
• RJ45 Ports: 8 × Gigabit Ethernet Ports
• Combo Ports: 2 × 10/100/1000BASE-T/SFP Ports
• Console Port: RJ45
• Optional Redundant Power Supply: DPS-200
• Recommended RPS Cable: DPS-CB150-2PS
• Switching Capacity: 20Gbps
• 64-Byte Packet Forwarding Rate: 14.88Mpps
• MAC Address Table: 16K Entries
• DRAM for CPU: 128MB
• Packet Buffer Memory: 1.5MB
• Flash Memory: 32MB
• Jumbo Frame: 12,288 Bytes
• MTBF: 711,565.6 Hours
• Acoustic Level: 33.8dB
• Heat Dissipation: 56.26BTU/h
• Power Input: 100 to 240V AC, 50 to 60Hz, Internal Universal Power Supply
• Maximum Power Consumption: 16.5W
• Dimensions: 228.5 × 195 × 44mm
• Weight: 1.11kg
• Ventilation: Smart Fan, turns on above 26°C and turns off below 20°C
• Power Surge Protection: IEC61000-4-5 10/700µs 6kV surge protection on all Ethernet ports
• Operating Temperature: 0°C to 50°C
• Storage Temperature: -40°C to 70°C
• Operating Humidity: 10% to 90% RH
• Storage Humidity: 5% to 90% RH
• Emission Standards: CE, FCC, IC, C-Tick, VCCI, BSMI
• Safety Standards: CB, UL/cUL, BSMI
• Certification: IPv6 Ready Logo Phase 2
• Virtual Stacking: D-Link Single IP Management, up to 32 units per virtual stack
• Layer 2 Features: 16K MAC Address Table, Flow Control, 802.3x Flow Control, HOL Blocking Prevention, STP, RSTP, MSTP, BPDU Filtering, Root Restriction, Loopback Detection, ERPS, L2PT
• Link Aggregation: 802.1AX and 802.3ad, up to 5 groups with 8 ports per group
• Port Mirroring: One-to-One, Many-to-One, Flow-based ACL Mirroring
• L2 Multicasting: IGMP Snooping v1/v2 with v3 awareness, MLD Snooping, 1024 groups, Fast Leave, Report Suppression, IGMP Authentication, IGMP/MLD Proxy Reporting
• VLAN Features: Up to 4094 VLANs, Port-based VLAN, MAC-based VLAN, GVRP, 802.1v Protocol VLAN, 802.1Q Tagged VLAN, Q-in-Q, ISM VLAN, VLAN Translation, Voice VLAN, VLAN Trunking, Asymmetric VLAN
• Layer 3 Features: 1024 ARP Entries, Gratuitous ARP, IPv6 Neighbor Discovery, Default Route
• QoS Features: 8 queues per port, DSCP, 802.1p, Strict Priority Queue, WRR, DRR, SPQ + WRR, Time-based QoS, trTCM, srTCM
• Bandwidth Control: Port-based, Flow-based, and Per-egress queue bandwidth control with 64kbps minimum granularity
• ACL Support: Up to 1024 ingress access rules, Time-based ACL, ACL Statistics, CPU Interface Filtering
• Security Features: SSH v1/v2, SSL v1/v2/v3, Port Security up to 64 MAC addresses per port, Storm Control, IP-MAC-Port Binding, ARP Inspection, IP Inspection, DHCP Snooping, Traffic Segmentation, D-Link Safeguard Engine, DHCP Server Screening, ARP Spoofing Prevention, BPDU Attack Protection, DoS Attack Prevention
• AAA Features: 802.1X, MAC-based Access Control, Web-based Access Control, Dynamic VLAN Assignment, Guest VLAN, RADIUS, TACACS, TACACS+, XTACACS+, Trusted Host
• OAM Features: Cable Diagnostics, 802.3ah Ethernet Link OAM, 802.1ag Connectivity Fault Management, D-Link Unidirectional Link Detection, sFlow
• Green Features: IEEE 802.3az Energy Efficient Ethernet, Power Saving by Link Status, Cable Length, LED Shut-Off, Port Shut-Off, Port Standby, System Hibernation
• Management Features: Web GUI, CLI, Telnet, TFTP, FTP, ZModem, SNMP v1/v2c/v3, SNMP Traps, System Log, SMTP, RMON, LLDP, LLDP-MED, DHCP Auto-Configuration, DHCP Relay, Multiple Image, CPU Monitoring, NTP/SNTP, Password Recovery, Ping, Traceroute
• Optional SFP Transceivers: DEM-302S-LX, DEM-310GT, DEM-311GT, DEM-312GT2, DEM-314GT, DEM-315GT, DGS-712, DEM-210, DEM-211
• Optional WDM SFP Transceivers: DEM-302S-BXD, DEM-302S-BXU, DEM-330R, DEM-330T, DEM-331R, DEM-331T, DEM-220R, DEM-220T
Applications:
• Metro Ethernet access networks
• Campus access networks
• Telecom distribution boxes
• Enterprise edge networks
• Small network cabinets
• Fiber uplink connectivity
• CCTV backbone and access layer networks
• ISP and service provider access deployments
• Office LAN and building distribution
• Managed network environments requiring compact design and high reliability
Connect Gates Recommendation:
• Connect Gates recommends the D-Link DGS-3000-10TC for projects that need a compact, reliable, and manageable Gigabit switch with fiber uplink flexibility.
• It is an ideal choice for telecom cabinets, distribution boxes, small network rooms, CCTV access points, and metro access networks.
• The 6kV surge protection and compact 9-inch design make it especially suitable for field cabinets and locations where space and electrical protection are important.
• For best performance, Connect Gates recommends using suitable SFP transceivers according to the required fiber distance, and adding DPS-200 redundant power supply where uptime is critical.