D-Link DPE-301GS – 30W Gigabit PoE Splitter with 5V / 9V / 12V Output, 802.3af/at PoE, Gigabit RJ45 & Plug-and-Play Installation

• The D-Link DPE-301GS is a 30W PoE Splitter designed to provide Gigabit Ethernet data and DC power to legacy non-PoE devices.

• It separates power and data from a PoE source, allowing non-PoE devices such as cameras, access points, routers, security devices, and consumer electronics to be installed in locations without nearby power outlets.

• The splitter supports IEEE 802.3af PoE and IEEE 802.3at PoE+, making it suitable for higher-power PoE installations.

• It supports selectable DC output voltages of 5V, 9V, or 12V to match different device requirements.

• The DPE-301GS supports Gigabit Ethernet through 10/100/1000BASE-T ports and can receive power over Ethernet up to 100m away from the PoE source.

• It is plug-and-play, requires no software, includes short-circuit and overcurrent protection, and can be powered by a PoE switch or a PoE injector such as the DPE-301GI.

• 30W Gigabit PoE Splitter.

• Separates PoE input into standard Ethernet data and DC power output.

• Designed for non-PoE devices.

• Supports IEEE 802.3af PoE.

• Supports IEEE 802.3at PoE+.

• Supports 10/100/1000Mbps Gigabit Ethernet.

• Supports 5V DC output up to 2.5A.

• Supports 9V DC output up to 2A.

• Supports 12V DC output up to 2A.

• Receives power up to 100m over Ethernet.

• Auto-negotiation on Ethernet port.

• Plug-and-play installation.

• No software required.

• Overcurrent protection.

• Output short-circuit protection.

• Green LED power indicator.

• Includes power adapter cables.

• Suitable for non-PoE cameras, non-PoE access points, routers, bridges, and network devices.

• Product Type: 30W Gigabit PoE Splitter

• Brand: D-Link

• Model: DPE-301GS

• PoE Input Port: 1 × 10/100/1000BASE-T Port

• LAN Output Port: 1 × 10/100/1000BASE-T Port

• Duplex Support: Half / Full-Duplex Operation

• PoE Input Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at

• LAN Output Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab

• Power Output: 5V DC up to 2.5A, 9V DC up to 2A, 12V DC up to 2A

• Maximum Distance: Up to 100m as per 802.3u specifications

• LED Indicator: Green Power On LED

• Included Power Adapter Cables: 5.5mm to 3.8mm Male-to-Male, 5.5mm to 5.5mm Male-to-Male

• Protection: Overcurrent Protection, Output Short-Circuit Protection

• Dimensions: 109.8 × 62.2 × 24.5 mm

• Weight: 98g

• Operating Temperature: 0°C to 60°C

• Storage Temperature: -30°C to 70°C

• Operating Humidity: 5% to 95%, Non-Condensing

• Storage Humidity: 5% to 95%, Non-Condensing

• Certifications: CE, FCC, VCCI, RCM, RoHS

• Powering non-PoE IP cameras using a PoE switch or PoE injector.

• Installing non-PoE wireless access points in ceilings, rooftops, entryways, or remote areas.

• Supplying data and power to non-PoE routers, bridges, and LAN devices.

• CCTV and surveillance projects where local power outlets are not available.

• Network installations where one Ethernet cable is preferred for both power and data.

• Using with DPE-301GI PoE Injector to power non-PoE network devices.

• Small office, villa, warehouse, shop, and remote network deployments.

• Recommended for projects where non-PoE devices need to be powered from a PoE network line.

• Suitable for non-PoE cameras, access points, routers, bridges, and network devices requiring 5V, 9V, or 12V DC output.

• Best used when the client needs Gigabit data, IEEE 802.3af/at PoE support, 30W PoE splitting capability, compact installation, and up to 100m PoE cable distance without adding a nearby power outlet.