D-Link DAP-3690 – AirPremier N Concurrent Dual Band Outdoor PoE Access Point with IP67, Dual Gigabit LAN, 802.3at PoE, WDS & 300Mbps Dual-Band Wi-Fi

• The D-Link DAP-3690 is an AirPremier N Concurrent Dual Band Outdoor PoE Access Point designed for business-class outdoor wireless network deployments.

• It supports concurrent dual-band wireless operation on both 2.4GHz and 5GHz bands, providing increased network capacity and flexible wireless coverage.

• The access point supports IEEE 802.11n wireless with maximum wireless signal rate up to 300Mbps on both the 2.4GHz and 5GHz bands.

• It is designed for outdoor and industrial environments with weather-resistant features, IP67 water / dust-proof compliance, built-in heater with sensor, power surge protection, and mounting kit for wall and pole installation.

• The DAP-3690 includes two Gigabit LAN ports, RJ45 console port, 802.3at PoE support, traffic control / QoS, internal RADIUS server, VLAN / multiple SSID support, and web redirection.

• It supports multiple operation modes including Access Point, WDS with AP, WDS, and Wireless Client, with advanced management through Web, HTTPS, Telnet, SSH, SNMP, AP Manager II, D-View, and AP Array.

• AirPremier N Concurrent Dual Band Outdoor PoE Access Point.

• Concurrent 2.4GHz and 5GHz dual-band connectivity.

• IEEE 802.11n wireless performance.

• Wireless speed up to 300Mbps on each band.

• 2 × Gigabit LAN ports.

• Supports IEEE 802.3at Power over Ethernet.

• RJ45 console port.

• IP67 water and dust-proof housing.

• Built-in heater with sensor for outdoor operation.

• Power surge arrestor included.

• Wall and pole mounting kit included.

• Supports Access Point mode.

• Supports WDS mode.

• Supports WDS with AP mode.

• Supports Wireless Client mode.

• Traffic control and QoS support.

• WMM Wireless Priority with 4 priority queues.

• Load balancing for optimized performance.

• Spanning Tree Protocol support for WDS deployment.

• Supports WPA / WPA2 Personal and Enterprise.

• Supports 64 / 128-bit WEP encryption.

• Supports 802.1x authentication.

• Supports internal RADIUS server.

• Supports Rogue AP Detection and ARP spoofing prevention.

• Supports MAC address filtering and WLAN partitioning.

• Supports up to 16 SSIDs, 8 per radio.

• Managed through Web, HTTPS, Telnet, SSH, SNMP, AP Manager II, D-View, and AP Array.

• Product Type: Concurrent Dual Band Outdoor PoE Access Point

• Brand: D-Link

• Model: DAP-3690

• Wireless Standard: IEEE 802.11a / b / g / n

• Ethernet Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab

• PoE Standard: IEEE 802.3at

• Wireless Frequency: 2.4GHz: 2.4–2.4835GHz, 5GHz: 5.15–5.35GHz / 5.47–5.85GHz

• Wireless Speed: Up to 300Mbps on 2.4GHz and up to 300Mbps on 5GHz

• LAN Ports: 2 × Gigabit LAN Ports

• Console Port: RJ45 Console Port

• Antenna Type: Detachable Dipole Antennas

• Antenna Gain: 5dBi at 2.4GHz, 7dBi at 5GHz

• Maximum Output Power EIRP: 20dBm at 2.4GHz Dual Chain, 23dBm at 5GHz Dual Chain

• Operating Modes: Access Point, WDS with AP, WDS, Wireless Client

• VLAN / SSID Support: Up to 16 SSIDs, 8 per radio

• QoS: 4 Priority Queues, WMM Wireless Priority

• Security: WPA Personal, WPA Enterprise, WPA2 Personal, WPA2 Enterprise, 64 / 128-bit WEP

• Access Control: SSID Broadcast Disable, MAC Address Access Control, Rogue AP Detection, 802.1x Authentication, Wireless LAN Partition

• Network Management: Telnet, SSH, Web Browser Interface, HTTP, HTTPS, SNMP, D-View Private MIB, AP Manager II, AP Array

• LED Indicators: Power, LAN, 5GHz, 2.4GHz

• Maximum Power Consumption: 18W with PoE and heater off, 24W with PoE and heater on

• Power Voltage: 48V DC ±10% for PoE

• Operating Temperature: -40°C to 60°C

• Storage Temperature: -40°C to 65°C

• Operating Humidity: 10% to 90%, Non-Condensing

• Storage Humidity: 5% to 95%, Non-Condensing

• Dimensions: 250 × 220 × 70 mm

• Weight: 2.53kg without antennas

• Outdoor Accessories: Four Embedded Surge Arrestors, PoE Base Unit, Grounding Wire, Wall Mounting Kit, Pole Mounting Kit

• Certifications: FCC, CE, IC, C-Tick, NCC, UL, Wi-Fi, IP67

• Outdoor business wireless network deployment.

• Hotspot networks for outdoor users.

• School campuses, airports, golf courses, marinas, and outdoor venues.

• Manufacturing plants and industrial locations.

• Convention halls and large business environments.

• Outdoor Wi-Fi coverage for public areas and enterprise networks.

• WDS wireless bridge and wireless client applications.

• Secure outdoor wireless networks requiring VLANs, multiple SSIDs, RADIUS, and WPA2 Enterprise.

• Outdoor installations requiring PoE, surge protection, heater support, and weather-resistant housing.

• Recommended for legacy outdoor wireless projects requiring rugged dual-band 802.11n access point deployment.

• Suitable for outdoor venues, factories, campuses, warehouses, industrial sites, marinas, and business hotspot networks.

• Best used when the client needs IP67 outdoor protection, concurrent dual-band Wi-Fi, dual Gigabit LAN ports, 802.3at PoE, WDS modes, VLAN / SSID segmentation, advanced security, and strong remote management features.

• For new high-density projects, Connect Gates recommends considering newer Wi-Fi 6 outdoor access points where higher capacity and modern wireless performance are required.