D-Link DGS-1510-28X – 24-Port Gigabit Stackable Smart Managed Switch with 4 × 10G SFP+ Uplink / Stacking Ports, Static Routing, VLAN & Layer 3 Lite Features
Overview:
• The D-Link DGS-1510-28X is a Gigabit Stackable Smart Managed Switch designed for SMB networks, enterprise workgroups, CCTV networks, server uplinks, and high-speed network expansion.
• It provides 24 × 10/100/1000 Mbps Gigabit ports and 4 × 10G SFP+ ports, making it suitable for access switching with high-speed 10G uplink or stacking connections.
• The switch supports physical stacking up to 6 units using the 10G SFP+ ports, with up to 40G full-duplex stacking bandwidth, allowing scalable network growth and easier centralized management.
• It supports Static Routing, Auto Surveillance VLAN, Auto Voice VLAN, ERPS, Loopback Detection, LLDP/LLDP-MED, VLAN, QoS, ACL, D-Link Safeguard Engine, ARP Spoofing Prevention, IP-MAC-Port Binding, and DoS Attack Prevention.
• Management is available through Web-Based GUI, Comprehensive CLI, SNMP, D-Link Network Assistant, IPv4/IPv6 Dual Stack, Dual Image, and out-of-band console interface.
Key Features:
• 24 Gigabit RJ-45 ports
• 4 × 10G SFP+ ports
• Stackable smart managed switch
• Physical stacking up to 6 units
• Up to 40G full-duplex stacking bandwidth
• 10G uplink connectivity
• Static routing support
• Auto Surveillance VLAN
• Auto Voice VLAN
• Ethernet Ring Protection Switching
• VLAN and QoS support
• IGMP and MLD Snooping
• LLDP and LLDP-MED
• Loopback Detection
• Cable Diagnostics
• Link Aggregation support
• Access Control Lists
• D-Link Safeguard Engine
• ARP Spoofing Prevention
• IP-MAC-Port Binding
• DoS Attack Prevention
• Web GUI, CLI and SNMP management
• D-Link Network Assistant support
• Dual image support
• D-Link Green 3.0 power saving
Technical Specifications:
General:
• Brand: D-Link
• Model: DGS-1510-28X
• Product Type: Gigabit Stackable Smart Managed Switch
• Series: DGS-1510 Series
• Hardware Version: A1
• Size: 19-Inch Standard Rack Width, 1U Height
• Interfaces: 24 × 10/100/1000 Mbps Ports + 4 × 10G SFP+ Ports
• PoE Support: Not Supported
• Application: SMB Networks, Enterprise Workgroups, CCTV Networks, 10G Uplinks, Server and Core Network Connectivity
Port Standards and Functions:
• Ethernet Standard: IEEE 802.3 10BASE-T Ethernet
• Fast Ethernet Standard: IEEE 802.3u 100BASE-TX Fast Ethernet
• Gigabit Ethernet Standard: IEEE 802.3ab 1000BASE-T Gigabit Ethernet
• 10G Ethernet Standard: IEEE 802.3ae 10 Gigabit Ethernet
• Flow Control: IEEE 802.3x Flow Control for Full-Duplex Mode
• Auto-Negotiation: Supported
• Network Cables: UTP Cat.5 / Cat.5e up to 100m, EIA/TIA-568 100-ohm STP up to 100m
• Duplex Mode: Full/Half-Duplex for 10/100 Mbps, Full-Duplex for 1000 Mbps
• MDI/MDIX: Auto or Configurable MDI/MDIX
Performance:
• Switching Capacity: 128Gbps
• Forwarding Rate: 95.24Mpps
• Transmission Method: Store-and-Forward
• MAC Address Table: Up to 16,384 Entries per Device
• Static MAC Entries: Up to 512
• Packet Buffer Memory: 1.5MB per Device
• MTBF: 516,593 Hours
Stacking:
• Virtual Stacking: Supported
• D-Link Single IP Management: Supported
• Virtual Stack Capacity: Up to 32 Devices
• Virtual Stacking Bandwidth: Up to 20G
• Physical Stacking: Supported
• Physical Stack Capacity: Up to 6 Units
• Stacking Topology: Duplex Chain / Ring
• Stacking Bandwidth: Up to 40G Full-Duplex
Layer 2 Features:
• MAC Address Table: Up to 16,384 Entries
• Flow Control: 802.3x Flow Control
• HOL Blocking Prevention: Supported
• Jumbo Frame: Up to 9,216 Bytes
• IGMP Snooping: IGMP v1/v2, IGMP v3 Awareness
• IGMP Groups: Up to 512 Groups
• Static Multicast Addresses: Up to 128
• IGMP Per VLAN: Supported
• IGMP Snooping Querier: Supported
• Host-Based IGMP Snooping Fast Leave: Supported
• MLD Snooping: MLD v1/v2 Awareness
• MLD Groups: Up to 512 Groups
• Spanning Tree Protocol: STP, RSTP, MSTP
• Loopback Detection: Supported
• Link Aggregation: 802.3ad, up to 32 Groups, 8 Ports per Group
• Port Mirroring: Up to 4 Mirroring Groups
• ERPS: Ethernet Ring Protection Switching
VLAN and QoS:
• VLAN: 802.1Q Tagged VLAN
• VLAN Groups: 4K VLAN Groups
• Configurable VID: 0 to 4094
• GVRP: Supported
• Asymmetric VLAN: Supported
• Auto Voice VLAN: Supported
• Auto Surveillance VLAN: Supported
• MAC-Based VLAN: Supported
• Protocol-Based VLAN: Supported
• QoS Queues: 8 Queues per Port
• Queue Handling: SPQ, WRR, DRR, SPQ + WRR
• Bandwidth Control: Port-Based Ingress / Egress
• QoS Classification: 802.1p, VLAN, MAC Address, EtherType, IP Address, DSCP, Protocol Type, TCP/UDP Port, IPv6 Traffic Class, IPv6 Flow Label
Layer 3 Features:
• ARP: Supported
• Static ARP: 256 Entries
• IPv6 Neighbor Discovery: Supported
• IP Interfaces: 16
• Default Routing: Supported
• Static Routing: Supported
• IPv4 Static Routes: 64 Entries
• IPv6 Static Routes: 32 Entries
• UDP Helper: Supported
Security Features:
• ACL: Up to 256 Access Lists, 768 Rules
• ACL Actions: Permit / Deny
• Time-Based ACL: Supported
• Port Security: Up to 128 MAC Addresses per Port
• Storm Control: Broadcast / Multicast / Unicast
• Dynamic ARP Inspection: Supported
• D-Link Safeguard Engine: Supported
• DHCP Server Screening: Supported
• ARP Spoofing Prevention: Supported
• SSH: v2, IPv4 / IPv6
• SSL: v1 / v2 / v3, IPv4 / IPv6
• BPDU Attack Protection: Supported
• DoS Attack Prevention: Supported
• Traffic Segmentation: Supported
• IP-MAC-Port Binding: Supported
• DHCP Snooping: Supported
• IP Source Guard: Supported
• IPv6 DHCP Guard: Supported
• IPv6 RA Guard: Supported
• IPv6 Snooping: Supported
• IPv6 Source Guard: Supported
• IPv6 ND Inspection: Supported
AAA and Access Control:
• 802.1X Authentication: Port and MAC-Based Authentication
• Authentication Database: RADIUS and Local Server
• Authentication Methods: EAP, OTP, TLS, TTLS, PEAP
• Web-Based Access Control: Supported
• MAC-Based Access Control: Supported
• Dynamic VLAN Assignment: Supported
• Guest VLAN: Supported
• RADIUS and TACACS+ Authentication: Supported
• RADIUS and TACACS+ Accounting: Supported
Management Features:
• Web-Based GUI: Supported
• Command Line Interface: Supported
• SNMP: v1 / v2c / v3
• SNMP Trap: Supported
• D-Link Network Assistant: Supported
• Telnet Server: Supported
• Telnet Client: CLI Only
• TFTP Client: Supported
• System Log: Up to 10,000 Entries
• Debug Command: Supported
• Dual Images: Supported
• DHCP Client: Supported
• DHCP Relay: Supported
• DHCP Auto Configuration: Supported
• IPv4 / IPv6 Dual Stack: Supported
• RMON v1: Supported
• LLDP / LLDP-MED: Supported
• Cable Diagnostics: Supported
• sFlow: Supported
• Factory Reset: Supported
• NTP / SNTP: Supported
• Surveillance Mode: Supported
Physical and Environmental:
• AC Input: 100 to 240VAC, 50/60Hz Internal Universal Power Supply
• Maximum Power Consumption: 44.2W
• Standby Power Consumption: 28.9W
• Fans: 2 × Smart Fans
• Acoustics: 45.8dB(A)
• Heat Dissipation: 138.79BTU/hr
• Operating Temperature: -5°C to 50°C
• Storage Temperature: -20°C to 70°C
• Operating Humidity: 0% to 95% Non-Condensing
• Storage Humidity: 0% to 95% Non-Condensing
• Dimensions: 440 × 210 × 44mm
• Weight: 2.40kg
• Certifications: CE, FCC, C-Tick, VCCI, BSMI, CCC, IPv6 Ready Logo Phase 2
• Safety: cUL, CB
Optional Accessories:
• DEM-CB100S: 10G SFP+ 1m Direct Attach Cable
• DEM-CB300S: 10G SFP+ 3m Direct Attach Cable
• DEM-CB700S: 10G SFP+ 7m Direct Attach Cable
• DEM-431XT: 10GBASE-SR SFP+ Transceiver
• DEM-432XT: 10GBASE-LR SFP+ Transceiver, 10km
• DEM-433XT: 10GBASE-ER SFP+ Transceiver, 40km
• DEM-434XT: 10GBASE-ZR SFP+ Transceiver, 80km
Applications:
• SMB network infrastructure
• Enterprise workgroup switching
• CCTV and surveillance networks
• 10G uplink aggregation
• Server and storage connectivity
• Core or distribution switching
• VLAN-based network segmentation
• Voice, video, and data networks
• Stackable network expansion projects
• High-speed fiber backbone connectivity
Connect Gates Recommendation:
• Connect Gates recommends the D-Link DGS-1510-28X for business and CCTV networks that require 24 Gigabit access ports with 4 × 10G SFP+ uplinks.
• It is suitable for projects that need 10G backbone connectivity, stacking capability, VLAN, QoS, Static Routing, and advanced security management.
• The physical stacking up to 6 units makes it suitable for scalable deployments where multiple switches need to be managed efficiently.
• For proper installation, Connect Gates recommends reviewing the uplink design, SFP+ module compatibility, stacking requirement, VLAN plan, rack space, and network management policy before deployment.