D-Link DPS-600 – 500W 19-Inch Rack-Mount Redundant Power Supply for D-Link Managed & PoE Switches

• The D-Link DPS-600 is a 500W Redundant Power Supply Unit designed to provide backup power for compatible D-Link managed switches and PoE network devices.

• It is designed for use with selected D-Link switch series, including DWS-30xx, DWS-40xx, and DES-3528P.

• The DPS-600 helps protect the network from downtime caused by internal switch power supply failure by using an integrated detection circuit to monitor the switch’s internal power supply.

• In case of power interruption or failure, the DPS-600 is immediately triggered to supply power to the switch and attached devices.

• The unit supports universal AC input from 90VAC to 264VAC, operates at 47Hz to 63Hz, and comes in a 19-inch rackmount, 1U form factor for professional rack installations.

• 500W redundant power supply unit

• Designed for compatible D-Link managed switches

• Suitable for selected PoE switch installations

• Supports DWS-30xx, DWS-40xx, and DES-3528P

• Provides backup power for switch internal power supply

• Integrated detection circuit for power failure monitoring

• Universal AC input support

• 19-inch rackmount design

• 1U height

• Diagnostic LED for RPS good / failed status

• Over-voltage protection

• Auto-recovery against short circuit or overload conditions

• Helps reduce network and device downtime

• Brand: D-Link

• Model: DPS-600

• Product Type: Rack-Mount Redundant Power Supply Unit

• Output Power: 500W Maximum

• Application: Switch Redundant Power Backup, Managed Switch Power Protection, PoE Switch Support

• Compatible Use: DWS-30xx, DWS-40xx, DES-3528P

• Rackmount: 19-Inch Rackmount Width, 1U Height

• Input Voltage: 90VAC to 264VAC

• Input Frequency: 47Hz to 63Hz

• Input Current: 10A @ 115VAC, 60Hz Maximum / 5A @ 230VAC, 50Hz Maximum

• Inrush Current: 30A @ 115VAC, 60Hz, 25°C Maximum / 60A @ 230VAC, 50Hz, 25°C Maximum

• Output Power: 500W Maximum

• Efficiency: 80% Typical at Nominal Line and Maximum Load

• Line Regulation: Less than +2% at Rated Load with ±10% Nominal Input Voltage Change

• Load Regulation: ±10% for +12V / ±3% for -50V

• Hold-Up Time: 16ms Typical at 115VAC Input and Rated Load

• Over Voltage Protection: Trip Point Below 16V for +12V Output

• Short Circuit / Overload Protection: Auto-Recovery Mode Supported

• -50V Output Protection: Protects Against Short Circuit or Overload Conditions Below -57V

• Diagnostic LED: RPS Good / Failed

• MTBF: 598,664 Hours

• Dimensions: 441 × 139 × 44.5mm

• Rack Size: 19-Inch Width, 1U Height

• Weight: 3.5kg

• Operating Temperature: 0°C to 50°C

• Storage Temperature: -40°C to 85°C

• Operating Humidity: 10% to 90% RH, Non-Condensing

• EMI Approvals: FCC Class A, CE, VCCI

• Safety Approvals: UL, CUL

• Warranty: 1-Year Limited Warranty

• Redundant power backup for compatible D-Link switches

• PoE switch power protection

• Managed switch power continuity

• Enterprise network rack installations

• CCTV and data network core switching racks

• Reducing downtime caused by internal switch power supply failure

• High-availability network infrastructure

• Professional 19-inch rack power deployment

• Connect Gates recommends the D-Link DPS-600 for professional network racks that require reliable 500W redundant power backup for compatible D-Link managed and PoE switches.

• It is suitable for critical switching environments where network downtime must be minimized.

• Before installation, Connect Gates recommends checking switch compatibility, required power budget, rack space, ventilation, AC power source, and correct RPS cable connection.