D-Link DGS-F3016P-4S – 20-Port Gigabit Outdoor Managed Long Range PoE Switch with 16 PoE+ Ports, 4 SFP Ports, ERPS & Dual Power Input

• The D-Link DGS-F3016P-4S is a Layer 2 Gigabit Outdoor Managed PoE Switch designed for outdoor surveillance, industrial networks, and harsh environment installations.

• It comes with 16 × 10/100/1000BASE-T PoE / PoE+ ports and 4 × 1000BASE-X SFP ports for fiber uplink connectivity.

• The switch is suitable for large IP camera systems, outdoor cabinets, smart city networks, factories, warehouses, and mission-critical PoE deployments.

• It features IP40-rated metal housing, fanless passive cooling, high EMC endurance, and wide operating temperature range from -40°C to +75°C.

• The DGS-F3016P-4S supports ERPS fast failover under 50 ms, helping maintain network stability in ring topology deployments.

• It also includes advanced Layer 2 management and security features such as VLAN, QoS, STP/RSTP/MSTP, port mirroring, link aggregation, bandwidth control, broadcast storm control, IGMP/MLD Snooping, Static MAC, and L2/L3 ACL.

• Layer 2 Gigabit Outdoor Managed PoE Switch.

• 16 × 10/100/1000BASE-T PoE / PoE+ ports.

• 4 × 1000BASE-X SFP fiber uplink ports.

• 1 × RJ-45 RS-232 console port.

• Long-range PoE switch design.

• Supports up to 30W per PoE port.

• 40Gbps switching capacity.

• 29.8Mpps packet forwarding rate.

• 16K MAC address table.

• 4.1MB packet buffer.

• Store-and-forward transmission method.

• IP40-rated metal housing.

• Fanless passive cooling design.

• Wide operating temperature from -40°C to +75°C.

• Dual redundant power input.

• Reverse polarity protection.

• ERPS under 50 ms fast failover recovery.

• Static MAC, Storm Control, and IGMP Snooping.

• Loopback detection and cable diagnostics.

• IPv4 / IPv6 management support.

• SNMP v1/v2/v3, Telnet, Syslog, LLDP, LACP, TFTP, ICMP, and Pingv6 support.

• DIN rail and wall mountable design.

• Product Type: Layer 2 Gigabit Outdoor Managed PoE Switch

• Brand: D-Link

• Model: DGS-F3016P-4S

• RJ45 Ports: 16 × 10/100/1000BASE-T PoE / PoE+ Ports

• SFP Ports: 4 × 1000BASE-X SFP Ports

• Console Port: 1 × RS-232 Console Port RJ-45

• Media Interface Exchange: Auto MDI/MDIX for all twisted-pair ports

• Ethernet Standards: IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z, IEEE 802.3az, IEEE 802.3x Flow Control

• Duplex Mode: Full/Half-duplex for 10/100Mbps, Full-duplex for 1000Mbps

• Switching Capacity: 40Gbps

• Packet Forwarding Rate: 29.8Mpps

• MAC Address Table: 16K

• Transmission Method: Store-and-forward

• Packet Buffer Size: 4.1MB

• PoE Support: PoE / PoE+

• PoE Power Per Port: Up to 30W per port

• Diagnostic LEDs: PWR1, PWR2, Alarm, SYS, Link/Act, PoE Status

• Power Input: 48–56V DC redundant inputs

• Reverse Polarity Protection: Supported

• Weight: 1.8kg

• Dimensions: 164 × 130 × 78.8 mm

• Operating Temperature: -40°C to +75°C

• Storage Temperature: -40°C to +85°C

• Ambient Relative Humidity: 5% to 95% at 55°C, non-condensing

• Housing: IP40-rated metal casing

• Installation: DIN rail / wall mountable

• MTBF: 300,000 hours

• Protocol Support: IPv4, IPv6, IGMP v1/v2/v3 Snooping, MLD v1/v2 Snooping, DHCP Relay, GARP, GVRP, NTP, SNTP, 802.1X, EAP, SNMP v1/v2/v3, RMON, TFTP, ICMP, Telnet, Syslog, LLDP, LACP, Pingv6

• VLAN: 802.1Q VLAN, 512 active VLANs, port-based VLAN, MAC-based VLAN

• QoS: 802.1p, 4 priority queues, Strict and Weighted Round Robin queue handling

• Security: 802.1X, Layer 2 ACL, Layer 3 ACL

• Redundancy: ERPS fast failover recovery under 50 ms

• Troubleshooting: Loopback detection and cable diagnostics

• Advanced Security: Static MAC, Storm Control, IGMP Snooping

• Safety: FCC, CE, ROHS

• EMC: FCC Part 15 Subpart B Class A, EN 55032, EN 55035, EN 61000-3-2, EN 61000-3-3, EN 61000-6-2, EN 61000-6-4

• EMS: IEC 61000-4-2 ESD, IEC 61000-4-3 RS, IEC 61000-4-4 EFT, IEC 61000-4-5 Surge, IEC 61000-4-6 CS, IEC 61000-4-8 PFMF, IEC 61000-4-11 DIP

• Shock: MIL-STD-810G Method 516.5

• Vibration: MIL-STD-810F Method 514.5 C-1 & C-2

• Freefall: MIL-STD-810F Method 516.5

• Environmental: ROHS

• Large outdoor CCTV and surveillance networks.

• Industrial network cabinets and control panels.

• Smart city and outdoor security projects.

• Factory, warehouse, and logistics network infrastructure.

• IP camera and wireless access point PoE deployments.

• Fiber uplink connections between remote network points.

• Ring topology networks requiring ERPS redundancy.

• Harsh environment PoE installations requiring high port density.

• Recommended for medium and large outdoor surveillance projects requiring high PoE port density with managed Layer 2 control and fiber uplinks.

• Suitable for IP camera networks, factories, warehouses, outdoor cabinets, smart city installations, and critical infrastructure projects.

• Best used when the project requires 16 PoE ports, 4 SFP uplinks, ERPS redundancy, strong outdoor industrial protection, and professional network management.