D-Link DGS-F3004P-2S – 6-Port Gigabit Outdoor Managed Long Range PoE Switch with 4 PoE+ Ports, 2 SFP Ports, ERPS & Dual Power Input
Overview:
• The D-Link DGS-F3004P-2S is a Layer 2 Gigabit Outdoor Managed PoE Switch designed for outdoor surveillance, industrial networks, and harsh environment deployments.
• It comes with 4 × 10/100/1000BASE-T PoE / PoE+ ports and 2 × 1000BASE-X SFP ports for fiber uplink connectivity.
• The switch supports long-range PoE applications and provides a PoE budget up to 60W for connected PoE devices.
• It features an IP40-rated metal housing, fanless passive cooling design, high EMC endurance, and wide operating temperature range from -40°C to +75°C.
• The DGS-F3004P-2S supports Layer 2 management features including VLAN, QoS, STP/RSTP/MSTP, port mirroring, link aggregation, bandwidth control, broadcast storm control, IGMP/MLD Snooping, and L2/L3 ACL.
• It also supports ERPS fast failover under 50 ms for ring topology redundancy, helping reduce downtime in mission-critical network environments.
Key Features:
• Layer 2 Gigabit Outdoor Managed PoE Switch.
• 4 × 10/100/1000BASE-T PoE / PoE+ ports.
• 2 × 1000BASE-X SFP fiber uplink ports.
• 1 × RJ-45 RS-232 console port.
• Long-range PoE switch design.
• PoE budget up to 60W.
• Supports up to 30W per PoE port.
• 12Gbps switching capacity.
• 16K MAC address table.
• 1.5MB packet buffer.
• Store-and-forward transmission method.
• IP40-rated metal housing.
• Fanless passive cooling design.
• Wide operating temperature from -40°C to +75°C.
• Dual redundant power input.
• Reverse polarity protection.
• ERPS under 50 ms fast failover recovery.
• Loopback detection and cable diagnostics.
• Static MAC, Storm Control, and IGMP Snooping.
• Web UI, CLI, SNMP, Telnet, Syslog, LLDP, LACP, and TFTP management support.
• DIN rail and wall mountable design.
Technical Specifications:
• Product Type: Layer 2 Gigabit Outdoor Managed PoE Switch
• Brand: D-Link
• Model: DGS-F3004P-2S
• Series: DGS-F3000 Series
• RJ45 Ports: 4 × 10/100/1000BASE-T PoE / PoE+ Ports
• SFP Ports: 2 × 1000BASE-X SFP Ports
• Console Port: 1 × RS-232 Console Port RJ-45
• Relay Outputs: 2 relay outputs with current carrying capacity of 1A @ 24V DC
• Media Interface Exchange: Auto MDI/MDIX for all twisted-pair ports
• Ethernet Standards: IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z, IEEE 802.3az, IEEE 802.3x Flow Control
• Duplex Mode: Full/Half-duplex for 10/100Mbps, Full-duplex for 1000Mbps
• Switching Capacity: 12Gbps
• MAC Address Table: 16K
• Transmission Method: Store-and-forward
• Packet Buffer Size: 1.5MB
• PoE Support: PoE / PoE+
• PoE Power Budget: Up to 60W
• PoE Power Per Port: Up to 30W per port
• Diagnostic LEDs: PWR1, PWR2, Alarm, SYS, Link/Act, PoE Status
• Power Input: 48–56V DC redundant inputs with included power supply
• Input Current: 5.0A @ 51V DC
• Reverse Polarity Protection: Supported
• Weight: 870g
• Dimensions: 163 × 46.5 × 110 mm
• Operating Temperature: -40°C to +75°C
• Storage Temperature: -40°C to +85°C
• Ambient Relative Humidity: 5% to 95% at 55°C, non-condensing
• Housing: IP40-rated metal casing
• Installation: DIN rail / wall mountable
• MTBF: 175,200 hours
Software Features:
• Protocol Support: IPv4, IPv6, IGMP v1/v2/v3 Snooping, MLD v1/v2 Snooping, DHCP Relay, GARP, GVRP, NTP, SNTP, 802.1X, EAP, SNMP v1/v2/v3, RMON, TFTP, ICMP, Telnet, Syslog, LLDP, LACP, Pingv6
• VLAN: 802.1Q VLAN, 512 active VLANs, port-based VLAN, MAC-based VLAN
• QoS: 802.1p, 4 priority queues, Strict and Weighted Round Robin queue handling
• Security: 802.1X, Layer 2 ACL, Layer 3 ACL
• Redundancy: ERPS fast failover recovery under 50 ms
• Troubleshooting: Loopback detection and cable diagnostics
• Advanced Security: Static MAC, Storm Control, IGMP Snooping
Standards / Certifications / Compliance:
• Safety: UL 60950-1 2nd Edition, CSA C22.2 No.60950-1-07 2nd Edition, EN 60950-1, CB
• EMC: FCC Part 15 Subpart B Class A, EN 55032, EN 55024, EN 61000-3-2, EN 61000-3-3, EN 61000-6-2, EN 61000-6-4
• EMS: IEC 61000-4-2 ESD, IEC 61000-4-3 RS, IEC 61000-4-4 EFT, IEC 61000-4-5 Surge, IEC 61000-4-6 CS, IEC 61000-4-8 PFMF, IEC 61000-4-11 DIP
• Shock: MIL-STD-810G Method 516.5
• Vibration: MIL-STD-810F Method 514.5 C-1 & C-2
• Freefall: MIL-STD-810F Method 516.5
• Environmental: ROHS II
Applications:
• Outdoor surveillance and CCTV networks.
• Industrial network cabinets.
• Fiber uplink connections for IP cameras and access points.
• Smart city and outdoor security deployments.
• Factory and warehouse network infrastructure.
• Ring topology networks requiring ERPS redundancy.
• Harsh environment PoE installations.
• Remote PoE device deployment where power and data are required over Ethernet.
Connect Gates Recommendation:
• Recommended for outdoor surveillance and industrial projects requiring a managed Gigabit PoE switch with fiber uplink ports.
• Suitable for IP camera networks, outdoor cabinets, factories, warehouses, and smart city installations.
• Best used where the project requires PoE power, SFP uplinks, ERPS redundancy, strong environmental protection, and professional Layer 2 management.