D-Link DES-3200-26 – 24-Port Fast Ethernet Layer 2 Managed Switch with 2 Gigabit Combo SFP Uplink Ports
Overview:
• The D-Link DES-3200-26 is a Layer 2 managed switch designed for ETTX, FTTX, enterprise access, telecom, and distribution network deployments.
• It provides 24 × 10/100BASE-TX Fast Ethernet ports and 2 × combo 10/100/1000BASE-T / 100/1000 SFP uplink ports.
• The switch comes in a 19-inch 1U rack-mount design with fanless operation, making it suitable for network cabinets, telecom rooms, distribution racks, and enterprise access layers.
• It supports 8.8Gbps switching capacity, 6.6Mpps forwarding rate, 16K MAC address table, 1.5MB packet buffer, and jumbo frame up to 12KB.
• The DES-3200 Series supports 6kV surge protection on Ethernet ports, IPv6 Ready Logo Phase 2, D-Link Single IP Management, STP/RSTP/MSTP, Loopback Detection, Link Aggregation, ACL, IMPB, SSH/SSL, DHCP Snooping, ARP Spoofing Prevention, OAM, and advanced Layer 2 management features.
Key Features:
• 24-Port Fast Ethernet Layer 2 Managed Switch
• 24 × 10/100BASE-TX Ports
• 2 × Combo 10/100/1000BASE-T / 100/1000 SFP Ports
• 19-Inch 1U Rack-Mount Design
• Fanless Silent Operation
• 8.8Gbps Switching Capacity
• 6.6Mpps Forwarding Rate
• 16K MAC Address Table
• Jumbo Frame up to 12KB
• 6kV Surge Protection on Ethernet Ports
• IPv6 Ready Logo Phase 2
• D-Link Single IP Management up to 32 Units
• STP, RSTP, MSTP, Loopback Detection, and Link Aggregation
• Advanced Security with ACL, Port Security, IMPB, DHCP Snooping, ARP Spoofing Prevention, and DoS Attack Prevention
• Suitable for Enterprise Access, Telecom Rooms, Distribution Cabinets, ETTX, FTTX, and Managed Network Deployments
Technical Specifications:
• Product Type: Layer 2 Managed Fast Ethernet Switch
• Brand: D-Link
• Model: DES-3200-26
• Series: DES-3200 Series
• Hardware Version: C1
• Size: 19-inch standard rack-mount width, 1U height
• Port Configuration: 24 × 10/100BASE-TX + 2 × Combo 10/100/1000BASE-T / 100/1000 SFP
• Fast Ethernet Ports: 24 Ports
• Combo Ports: 2 × 10/100/1000BASE-T / 100/1000 SFP
• Console Port: RJ45
• Switching Capacity: 8.8Gbps
• 64-Byte Maximum Forwarding Rate: 6.6Mpps
• MAC Address Table: 16K Entries
• SDRAM for CPU: 128MB DDR2
• Packet Buffer: 1.5MB
• Flash Memory: 32MB
• Jumbo Frame: 12KB
• Power Input: 100 to 240V AC, 50/60Hz
• Maximum Power Consumption: 20.83W
• Heat Dissipation: 61.039BTU/h
• MTBF: 601,273 Hours
• Acoustic Level: 0dB, Fanless
• Dimensions: 441 × 210 × 44mm
• Ventilation: Fanless
• Power Surge Protection: IEC61000-4-5 10/700µs 6kV surge protection on all Ethernet ports
• Operating Temperature: -5°C to 50°C
• Storage Temperature: -40°C to 70°C
• Operating Humidity: 10% to 90% non-condensing
• EMI Standards: FCC Class A, CE Class A, VCCI Class A, IC, C-Tick, BSMI
• Safety Standards: CE, LVD, UL/cUL, CB, BSMI
• Certification: IPv6 Ready Logo Phase 2
• Stackability: Virtual Stacking, D-Link Single IP Management, up to 32 units per virtual stack
• Layer 2 Features: 16K MAC Address Table, Flow Control, 802.3x Flow Control, HOL Blocking Prevention, STP, RSTP, MSTP, BPDU Filtering, Root Restriction, Loopback Detection, ERPS, L2PT
• Link Aggregation: 802.1AX and 802.3ad, up to 13 groups with 8 ports per group
• Port Mirroring: One-to-One, Many-to-One, Flow-based ACL Mirroring
• L2 Multicasting: IGMP Snooping v1/v2 with v3 awareness, MLD Snooping, up to 1024 groups, Fast Leave, Report Suppression
• VLAN Features: Up to 4K VLANs, 802.1Q Tagged VLAN, Port-based VLAN, MAC-based VLAN, GVRP, 802.1v Protocol VLAN, VLAN Trunking, Q-in-Q, ISM VLAN, VLAN Translation, Voice VLAN
• Layer 3 Features: IPv6 Neighbor Discovery
• QoS Features: 8 queues per port, DSCP, 802.1p, Strict Priority, WRR, Strict + WRR, trTCM, srTCM, bandwidth control
• Bandwidth Control: Port-based, flow-based, and per-egress queue bandwidth control with 8Kbps minimum granularity
• ACL Support: Up to 1024 ingress access rules, Time-based ACL, ACL Statistics, CPU Interface Filtering
• Security Features: SSH v1/v2, SSL v1/v2/v3, Port Security up to 64 MAC addresses per port, Storm Control, Traffic Segmentation, IP-MAC-Port Binding, ARP Inspection, IP Inspection, DHCP Snooping, D-Link Safeguard Engine, DHCP Server Screening, DHCP Client Filtering, ARP Spoofing Prevention, BPDU Attack Protection, DoS Attack Prevention
• AAA Features: 802.1X, MAC-based Access Control, Web-based Access Control, Guest VLAN, RADIUS Accounting, TACACS, TACACS+, XTACACS+, Trusted Host
• OAM Features: Cable Diagnostics, 802.3ah Ethernet Link OAM, Dying Gasp, 802.1ag Connectivity Fault Management, D-Link Unidirectional Link Detection
• Green Features: D-Link Green 3.0, Power Saving Function, LED Shut-Off, Port Shut-Off, System Hibernation
• Management Features: Web GUI, CLI, Telnet, TFTP, FTP, ZModem, Command Logging, SNMP v1/v2c/v3, SNMP Traps, System Log, RMON, LLDP, DHCP Auto-Configuration, DHCP Relay, PPPoE Circuit-ID Tag Insertion, SNTP, CPU Monitoring, Memory Monitoring, Password Encryption, Password Recovery, Ping, Traceroute
• Optional SFP Transceivers: DEM-310GT, DEM-311GT, DEM-312GT2, DEM-314GT, DEM-315GT, DEM-210, DEM-211
• Optional WDM SFP Transceivers: DEM-330T, DEM-330R, DEM-331T, DEM-331R, DEM-220T, DEM-220R
Applications:
• Enterprise access layer networks
• Telecom room installations
• Distribution cabinet deployments
• ETTX and FTTX access networks
• Medium office managed networks
• ISP and service provider access networks
• CCTV access layer connectivity
• Fiber uplink connectivity
• Building network distribution
• Managed Fast Ethernet environments requiring rack-mount and fanless operation
Connect Gates Recommendation:
• Connect Gates recommends the D-Link DES-3200-26 for projects that require a reliable 24-port managed Fast Ethernet switch with Gigabit uplink flexibility.
• It is an ideal choice for enterprise access layers, telecom rooms, distribution cabinets, CCTV access networks, and service provider access deployments.
• The 19-inch rack-mount design, fanless operation, and 6kV surge protection make it suitable for professional cabinets where stable and quiet operation is required.
• For best performance, Connect Gates recommends using suitable SFP transceivers according to the required fiber distance and network topology.